Multi-Residential

Ideal for Load Bearing Partition Walls | Lift Shaft Walls | Pool Walls | Planter Boxes | Blade Walls | Balustrades | Curved Walls | Façade Walls | Basement Walls | Stair Shaft Walls | On Site Detention (OSD) Tanks | Columns | Retaining Walls | Misc. Ducts, Shafts & Risers Intertenancy (Party) Walls | Corridor Walls

Internal Applications

Multi-Residential | NCC Class 2 - 3

NCC / OTHER REQUIREMENTS
FRL ACOUSTIC
COLUMNS AND WALLS STAIR, DUCT, RISER, LOBBY, OR CORRIDOR WALL LIFT OR PLANT ROOM WALL LOAD BEARING PARTITION WALL INTERTENANCY (PARTY) WALL
SYSTEM PERFORMANCE All internal load bearing walls & columns Not separating a sole-occupancy unit Separating a sole-occupancy unit Not separating a sole-occupancy unit Separating a sole-occupancy unit Separating rooms within a sole-occupancy unit Separating sole- occupancy units Separating habitable room (other than a kitchen) in one unit from a wet area in another unit
System Components Dincel Profile Min. Plaster board Thick-ness Total Wall Width Rw (Rw+Ctr) Maximum FRL achievable Up to 90/90/90² FRL No acoustic req. Meets acoustic req. (Rw ≥ 50) No acoustic req. Meets acoustic req. (Rw ≥ 50 and discontinuous) No acoustic req. Meets acoustic req. (Rw + Ctr ≥ 50) Meets acoustic req. (Rw + Ctr ≥ 50 and discontinuous)
DIN-IW1 Dincel Wall
left bare
Dincel Application - System 1
left bare
110 N/A 110 48 (43) 90/90/90¹ - - - -
155 N/A 155 51 (45) 180/180/180¹ - - -
200 N/A 200 53 (48) 240/240/240¹ - - -
275 N/A 275 53 (48) 240/240/240¹ - - -
DIN-IW2 Dincel Wall
plasterboard
Dincel Application - System 2
left bare
110 10 120 45 (41) 90/90/90¹ - - - -
155 13 168 50 (45) 180/180/180¹ - - -
200 10 210 51 (46) 240/240/240¹ - - -
275 10 285 51 (46) 240/240/240¹ - - -
DIN-IW3 Dincel Wall
plasterboard
Dincel Application - System 3
plasterboard
110 10 130 45 (41) 90/90/90¹ - - - -
155 13 181 50 (45) 180/180/180¹ - - -
200 10 220 51 (46) 240/240/240¹ - - -
275 10 295 51 (46) 240/240/240¹ - - -
DIN-IW4 Dincel Wall
plasterboard
Dincel Application - System 4
28mm furring channels (600 c/c, 30mm cavity), plasterboard
110 13 166 45 (42) 90/90/90¹ - - - -
155 10 205 48 (43) 180/180/180¹ - - - -
200 10 250 53 (46) 240/240/240¹ - - -
275 10 325 53 (46) 240/240/240¹ - - -
DIN-IW5 Dincel Wall
plasterboard
Dincel Application - System 5
28mm furring channels (600 c/c, 30mm cavity), 25mm glasswool (HD), plasterboard
110 10 160 53 (46) 90/90/90¹ - - -
155 10 205 55 (48) 180/180/180¹ - - -
200 10 250 57 (50) 240/240/240¹ - -
275 10 325 57 (50) 240/240/240¹ - -
DIN-IW6 Dincel Wall
28mm furring channels (600 c/c, 45mm cavity), 25mm glasswool (HD), plasterboard
Dincel Application - System 6
28mm furring channels (600 c/c, 45mm cavity), 25mm glasswool (HD), plasterboard
110 16 232 63 (50) 90/90/90¹ - -
155 13 271 60 (52) 180/180/180¹ - -
200 13 316 63 (54) 240/240/240¹ - -
275 13 391 63 (54) 240/240/240¹ - -
DIN-IW7 Dincel Wall
left bare
Dincel Application - System 7
51mm steel studs (600 c/c, 71mm cavity), plasterboard
110 10 191 51 (43) 90/90/90¹ - -
155 10 236 54 (45) 180/180/180¹ - -
200 10 281 57 (47) 240/240/240¹ - -
275 10 356 57 (47) 240/240/240¹ - -
DIN-IW8 Dincel Wall
plasterboard
Dincel Application - System 8
51mm steel studs (600 c/c, 71mm cavity), 50mm glasswool (LD), plasterboard
110 13 207 57 (50) 90/90/90¹
155 13 252 63 (51) 180/180/180¹
200 10 291 61 (53) 240/240/240¹
275 10 366 61 (53) 240/240/240¹
DIN-IW9 Dincel Wall
28mm furring channel (600 c/c, 30mm cavity), plasterboard
Dincel Application - System 9
51mm steel studs (600 c/c, 71mm cavity), plasterboard
110 10 231 47 (41) 90/90/90¹ - - - -
155 10 276 51 (43) 180/180/180¹ - -
200 10 321 55 (46) 240/240/240¹ - -
275 10 396 55 (46) 240/240/240¹ - -
DIN-IW10 Dincel Wall
28mm furring channel (600 c/c, 30mm cavity), plasterboard
Dincel Application - System 10
51mm steel studs (600 c/c, 71mm cavity), 50mm glasswool (LD), plasterboard
110 13 237 57 (50) 90/90/90¹
155 13 282 63 (51) 180/180/180¹
200 13 327 61 (53) 240/240/240¹
275 13 402 61 (53) 240/240/240¹
DIN-IW11 Dincel Wall
28mm furring channel (600 c/c, 30mm cavity), 25mm glasswool (HD), plasterboard
Dincel Application - System 11
51mm steel studs (600 c/c, 71mm cavity), 50mm glasswool (LD), plasterboard
110 HD13 237 62 (50) 90/90/90¹
155 HD13 282 67 (52) 180/180/180¹
200 HD13 327 68 (53) 240/240/240¹
275 HD13 402 68 (53) 240/240/240¹

External Applications

Multi-Residential | NCC Class 2 - 3

NCC / OTHER REQUIREMENTS
FRL WATERPROOFING
COLUMNS AND WALLS BASEMENT WALL FAÇADE, BALUSTRADE OR BLADE WALL TANK OR POOL WALL RETAINING OR PLANTER BOX WALL
SYSTEM PERFORMANCE Those that require a FRL Above the water table Underneath the water table Separating exterior environment from interior Exterior environment on both sides of the wall All All
System Components Dincel Profile Total Wall Width Maximum FRL achievable Up to 90/90/90² FRL Waterproof Submerged conditions Waterproof (and includes insulation) Waterproof Waterproof Waterproof
DIN-EW1 Dincel Wall
left bare
Dincel Application - System 12
left bare
110 110 90/90/90¹ .-³
155 155 180/180/180¹ .-³
200 200 240/240/240¹ .-³
275 275 240/240/240¹ ✔³
DIN-EW2 Dincel Wall
choice of finish: paint, render or cladding
Dincel Application - System 13
left bare
110 110 90/90/90¹ .-³
155 155 180/180/180¹ .-³
200 200 240/240/240¹ .-³
275 275 240/240/240¹ ✔³
DIN-EW3 Dincel Wall
left bare
Dincel Application - System 14
50mm+ cavity, secondary wall for habitable room (either 110 Dincel, lightweight partition, masonry or dry wall)
110 283 90/90/90¹ .-³
155 328 180/180/180¹ .-³
200 373 240/240/240¹ .-³
275 448 240/240/240¹ ✔³
DIN-EW4 Dincel Wall
choice of finish: paint, render or cladding
Dincel Application - System 15
40mm insulation board, 28mm furring channel on clips, 13mm plasterboard
110 191 90/90/90¹
155 236 180/180/180¹
200 281 240/240/240¹
275 356 240/240/240¹
DIN-EW5 Dincel Wall
110mm brick veneer w/20mm cavity
Dincel Application - System 16
40mm insulation board, 28mm furring channel on clips, 13mm plasterboard
110 321 90/90/90¹
155 366 180/180/180¹
200 411 240/240/240¹
275 486 240/240/240¹
DIN-EW6 Dincel Wall
Insulated panel system on top hats
Dincel Application - System 17
28mm furring channels on clips, 13mm plasterboard
110 268 90/90/90¹
155 313 180/180/180¹
200 358 240/240/240¹
275 433 240/240/240¹

The ‘NCC/Other requirements’ information provided above is for guidance purposes only, please check with your consultants for specific requirements for your project.

The above requirements are based upon the NCC deemed-to-satisfy provisions (Specification C1.1 and F5.0 - F5.5)

The above performance is based on the following product densities:

  • 10mm thick plasterboard - 650 kg/m³ bulk density
  • 13mm thick plasterboard - 623 kg/m³ bulk density
  • HD13mm thick plasterboard (HD = High Density, typically fire rated plasterboard) - 808 kg/m³ bulk density
  • 16mm thick plasterboard - 766 kg/m³ bulk density
  • 25mm thick glasswool insulation (HD) - 24 kg/m³ bulk density
  • 50mm thick glasswool insulation (LD) - 11 kg/m³ bulk density
  • Concrete within Dincel formwork - 2350 kg/m³ bulk density

¹Dependant on design and wall loading. 'Structural Adequacy' component of FRL must be calculated and provided by the project's structural engineer, in accordance to AS3600, Eurocode or other relevant concrete design codes.

²FRL requirement is based upon a wall with a distance of less than 1.5m from a fire source feature. Please check the NCC for other FRL requirements which may be applicable to your project.

³Dincel recommends the 275 profile for permanently submerged applications due to enhanced design. For more information please refer to waterproofing documentation on our website.

Multi-Residential Case Studies

Ceerose ApartmentsJune 2017

Providing outstanding results for its customers is a key focus for Ceerose, one of Sydney’s leading property development and construction companies.

Luxury HomesApril 2018

Winston Hills is home to a new model of luxury living in Moses Way – a private estate populated by architecturally designed multi-million dollar residences where Dincel has proved itself to be a model building material.

CHC Affordale HousingJune 2017

For some, the term affordable housing might have connotations of bare necessity dwellings, perhaps similar to the threadbare commission homes of the 50s and 60s.

Residential ApartmentsJune 2017

Established in 1977, Sydney construction company Gondella Pty Ltd, has been in the industry for a long time. But rather than relying on only traditional construction techniques, it has become part of a growing number of smart builders turning to Dincel Wall to deliver time efficiency gains and cost-savings across multi-storey developments.

Bay Pavillions, ApartmentsOctober 2017

Alliance Project Group Project Manager, Matt Huttary, nominates the core construction of any build as the most difficult – this can include building lift shafts and fire stairs and involves careful consideration of safety requirements, expenses and time management.

Studio ApartmentsJune 2017

Tasked with creating 25 studio apartments, a garden courtyard and a retail space on a 10 metre by 45 metre site on Sydney’s busy Parramatta Road in Annandale, architects Environa Studio and builders PRA Constructions found Dincel Structural Walling really helped them out in a tight spot.

One Solution for all your
internal & external wall needs.

Where compliance matters

  • Structural
  • Fire
  • Waterproof
  • Acoustic
Let's get started
Dincel - One solution for all your internal and external wall needs